skip to Main Content

Time needed: Approximately five minutes

Maintenance frequency: Weekly

Overview: The material tray is a consumable with an approximate lifespan of 300 prints. Order a new material tray before the current tray expires or becomes damaged. 

When you take the material tray out of the printer, set it on a clean paper towel to protect the film.

How to clean the D4K Pro material tray:

Step-by-step:

1. Check the film at the bottom of the material tray whenever the material is removed. 

2. Look for pinholes, punctures, ripples, and other signs of stress. A slightly cloudy film is normal and will not affect the print quality. 

3. Check the glass panel below the material tray for smears or fingerprints, which can affect print quality.

4. Wipe the glass panel clean with a dry paper towel, taking care not to damage the anti-reflective coating. If needed, spay a small amount of ammonia-free glass cleaner on the paper towel and gently wipe the glass panel. 

5. Wipe the drip tray with a dry paper towel,  taking care not to damage the anti-reflective coating. If needed, spay a small amount of ammonia-free glass cleaner on the paper towel and gently wipe the drip tray.

×Close search
Search