skip to Main Content

External Components

Oxygen Concentrator

The oxygen concentrator creates a flow of oxygen into the printer via an internal series of tubes to the domeless material tray. It is delivered preset to the correct pressure.

PCA 2000 Curing Apparatus

The Parts Curing Apparatus is used for post-curing the printed models. It utilizes a unique system of UV LED light sources that use both 385nm to deep cure and 405nm for the perfect surface cure of each part. For more information, check the Curing Models page.

PWA 2000 Parts Washing Apparatus

The Parts Washing Apparatus is a convenient tool to assist in cleaning any uncured resin from 3D printed models.  The convenient removable basket allows for ease of use when dipping or extracting objects from the tank. For more information, check the Cleaning Models page.

Hood

The upper cover of the printer, made of strong material that protects the material from curing under the influence of ambient light. The hood of the Envision One has no locking mechanism. You can open or close it manually by rotating the hood on its hinges.

Material Tray

Material Tray

The material tray has been designed to work with the upward movement of the build platform. The material tray contains the material and should be treated with care. Clean your material tray with IPA and a paper towel. For more information, check the Installing Envision One Material Tray and Maintenance of Envision One Material Tray pages.

Clamping Handles

The clamping handles of the material tray are the part of the locking mechanism that secures the material tray in place. For more information, check the Installing Envision One Material Tray page.

Build Platform

Build Platform

Also known as Build PlateBuild trayPrintbedBedBuild Surface. The surface of the 3D printer on which the 3D printed part is formed. For more information, check the Installing Envision One Build Platform and Cleaning Envision One Build Platform pages.

Knob

The knob is a part of the locking mechanism that secures the build platform in place. For more information, check the Installing Envision One Build Platform page.

Additional Tools

Scraper

The main use for the metal scraper is to remove the built parts from the build platform. Apart from this, the scraper can also be used to remove material residues from the build platform. For more information, check the Detaching Models from the Build Platform page.

X-Acto Knife 

Use it to cut the supports off your models as precisely as possible.

×Close search
Search